PERMAS Integration in Simcenter
PERMAS is a powerful FEM solver for solving complex calculation tasks. Its simulation capabilities include statics, dynamics, temperature fields, fluid-structure coupling and non-linear simulations. We offer a direct interface to PERMAS integrated in NX and Simcenter 3D and thus complement the Multi Solver Support offer.
see the VideoTutorial
Features:
Export:
- General
- Partly export of input-file
- Visualisize Material Orientation in NX / Element CSYS / Material CSYS
- Visualisize sheet thickness for 2D-Elements in NX
- Solid Properties Check
- 3D-meshing
- TET4 / TET10 / FLTET4
- HEXE8 / HEXE20 / FLHEX8
- PENTA6 / PENTA15 / FLPENT6
- PYRA5 / FLPYR5
- INF3TRM3 / INF3QAM4
- 2D-meshing
- TRIA3 / QUAD4
- QUAMS4 / QUAMS8
- TRIMS3 / TRIMS6
- TRIM6
- QUAM8
- SHELL3 / SHELL4
- RBCEM1A3 / RBCEM1A4
- RBCBT1A3 / RBCBT1A4
- FSINTA4 / FSINTA3
- 1D-meshing
- Beams (BECOS, BECOC)
- Springs (SPRING1, SPRING3, SPRING6)
- Damper (DAMP1, DAMP3, DAMP6)
- RBE3(WLSCON)/RBE2(RIGID) als Elemente darstellen
- Zeroforce Elemente CA2ZERF1 / CA2ZERF3
- 0D-meshing
- Masspoint (MASS3, MASS6)
- Zeroforce Element CA1ZERF3
- Springelements X1STIFF3 / X1STIFF6
- Element Properties
- Variable thickness for shellelements
- Nonstructural mass for shellelements (AMASS)
- Offset for shellelements (NOFFSET)
- Offset for beamelements (OFFSET)
- Material Properties
- Structural Damping (DAMPING)
- Fluid Compressibility (COMPRESS)
- Fluid density (FLDENS)
- Thermischal Expansionscoefficient (THERMEXP)
- Material-Coordinate system (MATREF)
- Orthotropic Material (ORTHO)
- Laminate/Composite (LAMINATE)
- Plastic material behaviour (PLASTIC)
- Yield limit (YIELD)
- User defined Input
- Contakt/Glue
- CONTACT SURFACE TO SURFACE
- CONTACT SURFACE TO SURFNODE
- CONTACT NODE TO NODE
- Contaktparameter CONTVAL
- MPC ISURFACE (with DPITYPE=NODE or DPITYPE=SURFNODE). Dof-Typ DISP or PRES
- Automatic Contact finder for Polygongeometrie
- Bolt Preload
- PRETENSION PLANE
- PRETENSION THREAD
- Constraints and Loads
- Frequency dependent Loads (FREQLOAD)
- Locale Coordinate systems (RSYS und ROTB)
- Constraint (SUPPRESS). Fixed Constraint or selection of constraints. Constraint-Typ DISP or PRES
- Enforced displacement (PRESCRIBE & PREVAL). Constraint-Typ DISP or PRES
- Force (CONLOAD). Definition by magnitude and direction or by components
- Pressure (DISLOAD PRESS)
- Gravitation (INERTIA GRAVITY)
- Bearing load (CONLOAD)
- Torque (CONLOAD)
- Centrifugal pressure (DISLOAD PRESS)
- Centrifugal load (INERTIA ROTATION)
- Temperature load (DISLOADN TEMP). Distribution spatial or constant
- Rigid body modes (RIGMODE)
- Cyclic Symmetry (CYCLIC)
- Nonlinear Loading Table
- NLLOAD
- Multi point constraints
- MPC RIGID
- MPC RIGCON
- MPC WLSCON
- MPC JOIN
- MPC SAME
- MPC ASSIGN
- Userdefined Input
- SYSTEM
- RESULTS
- SITUATION
- Groups
- Nodes (NSET)
- Elements (ESET)
- Element faces (SURFACE)
- Material:
- Export of properties from NX library
- Alternativ: Export of material name and include in individual material list in PERMAS format
- FEM:
- PERMAS Elementcheck
- Connector Elemente
- Control Elemente
- NLMATERIAL
- NL stiffness of spring-elements
- SIM:
- Solver Settings / Parameter
- Mapping of Convection for thermal solve
Post Processing:
- General features of Siemens NX Postprocessing
Import:
neutral DATO-Format, from NX
- Elements
- ELEMENT
- ESET
- Nodes
- COOR
- NSET
- Material
- DENSITY
- ELASTIC
- THERMEXP
- DAMPING
- YIELD
- PLASTIC
- FLDENS
- COMPRESS
- LAMINATE
- PLY
- GASKET Material Namen
- Physical Properties
- SHELL
- SPRING
- DAMPER
- MASS
- INFA
- BEAM
- GASKET
- SCALAR
- ZEROFORC
- ELPROP
- GEODAT
- Constraints
- SUPPRESS
- Loads
- CONLOAD
- DISLOAD PRESS